Innokin Endura T18E replacement 2.0...
Innokin Endura T18E replacement 2.0 Ohm organic cotton coils. Packs of 5.
Warning: Last items in stock!
Pack of 5 replacement 2.0 Ohm coils with organic cotton wicking for the Innokin Endura T18E tank (not the T18).
Genuine product, comes with manufacturer's authenticity check sticker.
The Innokin Endura T18E 2.0 Ohm coil is a replacement organic cotton coil for the Innokin Prism tank used in the Endura T18E Starter Kit. These coils have 3 holes running from the top to the bottom of the coil to ensure liquid can freely enter the interior of the coil to avoid dry hits. If you need the coils with 5 holes click here. IF YOU HAVEN'T TRIED THE 2.0 BEFORE PROBABLY BEST TO STICK WITH THE 1.5.
Click here if you're looking for the 1.5 Ohm T18E coils.
IMPORTANT - both the T18 and T18E 2.0Ω coil are slightly shorter than the 1.5Ω and have a different silicone top. Innokin has confirmed this is deliberate and says "there is a groove, the coil should be put in the the right place, if coil is crooked, there is a gap".
For a great choice of suitable e-liquid flavours for these coils click here for 50% VG (usually more vapour but often less flavour) and here for 70% PG blends (usually more flavour, but less vapour). Stronger PG flavours perform better with these coils.
The main difference between a lower ohm coil versus a higher number is that less voltage is required for the lower ohm. The lower ohm coil is generally likely to heat faster, produce a warmer vapour and more of it. Click here for more information.
Priming e-cigarette coils before use is advised otherwise you may get a burnt taste and they may be ruined, and if they're cotton coils ensuring they're properly primed is particularly important. For more information click here.
For information about how to generally maintain e-cig tanks click here.
For information about all our product warranties click here.