Genuine replacement 2.0 Ohm organic...
Genuine replacement 2.0 Ohm organic cotton heating coils for the Innokin Endura T18 'Prism' tank.
Warning: Last items in stock!
Pack of 5 genuine replacement Innokin T18 Prism tank organic cotton coils 2.0Ω Ohm.
The box comes with a scratch sticker so you can check the authenticity of this product.
IF YOU HAVEN'T TRIED THESE 2.0 OHM COILS BEFORE STICK WITH THE T18 1.5 OHM.
NOT COMPATIBLE WITH THE T18E TANK - please read below
The Innokin Endura T18 2.0 Ohm coil is a replacement for the Innokin Prism tank used in the Endura T18 Starter Kit (which is no longer available). The coils have 5 holes running from the top to the bottom of the coil. Be careful you don't have the T18E tank because some say T18 on the tank, not T18E. The way to check is if the coil is shorter and has 3 holes, because these T18 coils have 5 holes and they're taller. If you need the smaller 3-holed T18E coils click here.
IMPORTANT - Both the T18 2.0Ω and T18E 2.0Ω coil are slightly shorter than the 1.5Ω coil and have a different silicone top. Innokin has confirmed this is deliberate and says "there is a groove, the coil should be put in the the right place, if coil is crooked, there is a gap".
The main difference between a lower ohm coil versus a higher number is that less voltage is required for the lower ohm. The lower ohm coil is generally likely to heat faster, produce a warmer vapour and more of it. Click here for more information.
Priming e-cigarette coils before use is advised otherwise you may get a burnt taste and they may be ruined, and if they're cotton coils ensuring they're properly primed is particularly important. For more information click here.
For information about how to generally maintain e-cig tanks click here.
For information about all our product warranties click here.