Youde UD Flat Ribbon Kanthal 0.5 Ohm 30ft View larger

UD Kanthal Flat Ribbon 0.5 Ohm 30ft


Youde UD flat ribbon kanthal A1 resistance wire. 30ft roll.

More details

IN STOCK

£ 3.99

More info

UD Kanthal Flat Ribbon Wire

30ft roll of Youde UD flat ribbon kanthal A1 resistance wire.

Youde is known for producing high quality wires for coils and rebuilding.

This flat ribbon wire has advantages over round wire as ribbon has a greater surface area in contact with the wick which means means more vapour, and reduced likelihood of hot spots.

Specification: 0.5mm (width) x 0.1mm (thickness) - 0.5 Ohms 24AWG

Important Warning

Rebuildable atomizers and their coils and wicks have known risks and therefore such devices and their sundries are for expert users only and should not be purchased by users with insufficient knowledge on how to stay safe.

  • A rebuildable coil/wick must be tested carefully with a meter to ensure it is safe to use
  • Tests must be carried out to ensure there are no shorts and the resistance isn't too low
  • New coils and wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection
  • No new coil/wick assembly should be used on an electronic device until known to be safe
  • Faulty wicks and coils can and will blow electronic devices, and they can cause personal injury

Warranty

Due to the nature of this item there is no warranty cover.

Write a review

UD Kanthal Flat Ribbon 0.5 Ohm 30ft

UD Kanthal Flat Ribbon 0.5 Ohm 30ft

Youde UD flat ribbon kanthal A1 resistance wire. 30ft roll.

23 other products in the same category: